Overview:

Ø         TEM-B64A is the multiple temperature inspection equipment, can maximum collecting 68 road  temperature probe, and it’s collection range is between －50℃ ~ 120℃, while the collection range of 4 road PT100 temperature is between －200℃ ~ 100℃. Suitable for accumulator battery, unit, warehouse, greenhouse, refrigerator and other places need multipoint temperature monitoring.

Characteristics:

Ø         Belong to precision network multiway temperature sensor, low power consumption, high stability;

Ø         The line of probe use the bus that have three-ware bus of parallel collection, convenient to construct.

Ø         RS485 output, can set communication baud rate (1200bps~9200bps) and address (0~31)

Ø         Communication address set by toggle switch, easy to operation.

Ø         Can easily registered 64 digital probes to the main engine through the configuration software.

Ø         The probe bus，the main engine, and the power are isolated, which helps to avoid interference in ground , avoid short circuit accident;

Technology index:

Ø         Power supply: 12VDC  plus-minus 10％，1W;

Ø         Temperature measurement range: digital probe: －50℃ ~ 120℃；platinum resistor: －200℃ ~ 100℃

Ø         Precision:  plus-minus 1.0℃ (full range )

Ø         Acquisition cycle: less than 1.5 seconds when 64 probes have.

Ø         Serial output: RS485

Ø         Digital probe main line ,maximum length: 80 meters;

Ø        Work environment of main energy: －10℃ ~ 60 ℃，10 ~ 95% RH;